Discovery of a novel NAMPT inhibitor that selectively targets NAPRT-deficient EMT-subtype cancer cells and alleviates chemotherapy-induced peripheral neuropathy.

Background: Exploiting synthetic lethality (SL) relationships between protein pairs has emerged as an important avenue for the development of anti-cancer drugs. Nicotinamide phosphoribosyltransferase (NAMPT) is the rate-limiting enzyme of the NAD+ salvage pathway, having an SL relationship with nicotinic acid phosphoribosyltransferase (NAPRT), the key enzyme in the NAD+ Preiss-Handler pathway. NAMPT inhibitor holds clinical potential not only as a promising cancer treatment but also as a means of protection against chemotherapy-induced-peripheral-neuropathy (CIPN). However, as NAD+ is essential for normal cells, the clinical use of NAMPT inhibitors is challenging. This study aimed to identify a novel NAMPT inhibitor with enhanced selective cytotoxicity against NAPRT-deficient cancer cells as well as prominent efficacy in alleviating CIPN. Methods: We began by conducting drug derivatives screening in a panel of lung cancer cell lines to select an agent with the broadest therapeutic window between the NAPRT-negative and-positive cancer cell lines. Both in vitro and In vivo comparative analyses were conducted between A4276 and other NAMPT inhibitors to evaluate the NAPRT-negative cancer cell selectivity and the underlying distinct NAMPT inhibition mechanism of A4276. Patient-derived tumor transcriptomic data and protein levels in various cancer cell lines were analyzed to confirm the correlation between NAPRT depletion and epithelial-to-mesenchymal transition (EMT)-like features in various cancer types. Finally, the efficacy of A4276 for axonal protection and CIPN remedy was examined in vitro and in vivo. Results: The biomarker-driven phenotypic screening led to a discovery of A4276 with prominent selectivity against NAPRT-negative cancer cells compared with NAPRT-positive cancer cells and normal cells. The cytotoxic effect of A4276 on NAPRT-negative cells is achieved through its direct binding to NAMPT, inhibiting its enzymatic function at an optimal and balanced level allowing NAPRT-positive cells to survive through NAPRT-dependent NAD+ synthesis. NAPRT deficiency serves as a biomarker for the response to A4276 as well as an indicator of EMT-subtype cancer in various tumor types. Notably, A4276 protects axons from Wallerian degeneration more effectively than other NAMPT inhibitors by decreasing NMN-to-NAD+ ratio. Conclusion: This study demonstrates that A4276 selectively targets NAPRT-deficient EMT-subtype cancer cells and prevents chemotherapy-induced peripheral neuropathy, highlighting its potential as a promising anti-cancer agent for use in cancer monotherapy or combination therapy with conventional chemotherapeutics.

Structural optimization of novel Ras modulator for treatment of Colorectal cancer by promoting ß-catenin and Ras degradation.

Ras protein has been considered a fascinating target for anticancer therapy because its malfunction is closely related to cancer. However, Ras has been considered undruggable because of the failure to regulate its malfunction by controlling the Ras activation mechanism. Recently, Lumakras targeting the G12C mutation was approved, and therapeutic interest in Ras for anticancer therapy has been rejuvenated. Here, we present a series of compounds that inhibit Ras via a unique mechanism of action that exploits the relationship between the Wnt/ß-catenin pathway and Ras. KYA1797K (1) binds to axin to stabilize the ß-catenin destruction complex that causes the phosphorylation and subsequent degradation of Ras, similar to canonical ß-catenin regulation. Based on the chemical structure of 1, we performed a structural optimization and identified 3-(2-hydroxyethyl)-5-((6-(4-nitrophenyl)pyridin-2-yl)methylene)thiazolidine-2,4-dione (13d) as the most potent compound. 13d displayed antitumor effects in a colorectal cancer model with enhanced inhibition activity on Ras. The results of this study suggest that the further development of 13d could contribute to the development of Ras inhibitors with novel mechanisms of action.

Prediction Models for Identifying Ion Channel-Modulating Peptides via Knowledge Transfer Approaches.

Ion channels, which can be modulated by peptides, are promising drug targets for neurological, metabolic, and cardiovascular disorders. Because it is expensive and labor-intensive to experimentally screen ion channel-modulating peptides (IMPs), in-silico approaches can serve as excellent alternatives. In this study, we present PrIMP, prediction models for screening IMPs that can target sodium, potassium, and calcium ion channels, as well as nicotine acetylcholine receptors (nAChRs). To overcome the data insufficiency of the IMPs, we utilized two types of knowledge transfer approaches: multi-task learning (MTL) and transfer learning (TL). MTL enabled model training for four target tasks simultaneously with hard parameter sharing, thereby increasing model generalization. TL transferred knowledge of pre-trained model weights from antimicrobial peptide data, which was a much larger, naturally-occurring functional peptide dataset that could potentially improve the model performance. MTL and TL successfully improved the prediction performance of prediction models. In addition, a hybrid approach by implementing deep learning along with traditional machine learning was utilized, with additional performance improvements. PrIMP achieved F1 scores of 0.924 (sodium ion channel), 0.937 (potassium ion channel), 0.898 (calcium ion channel), and 0.931 (nAChRs). The pre-processed dataset and proposed model are available at https://github.com/bzlee-bio/PrIMP.

Identification of CaAN3 as a fruit-specific regulator of anthocyanin biosynthesis in pepper (Capsicum annuum).

KEY MESSAGE: The novel gene CaAN3 encodes an R2R3 MYB transcription factor that regulates fruit-specific anthocyanin accumulation. The key regulatory gene CaAN2 encodes an R2R3 MYB transcription factor that regulates anthocyanin biosynthesis in various tissues in pepper (Capsicum annuum). However, CaAN2 is not expressed in certain pepper accessions showing fruit-specific anthocyanin accumulation. In this study, we identified the novel locus CaAN3 as a regulator of fruit-specific anthocyanin biosynthesis, using an F2 population derived from a hybrid cultivar with purple immature fruits and segregating for CaAN3. We extracted total RNA, assembled two RNA pools according to fruit color, and carried out bulked segregant RNA sequencing. We aligned the raw reads to the pepper reference genome Dempsey and identified 6,672 significant single nucleotide polymorphisms (SNPs) by calculating the Δ(SNP-index) between the two pools. We then conducted molecular mapping to delimit the target region of CaAN3 to the interval 184.6-186.4 Mbp on chromosome 10. We focused on Dem.v1.00043895, encoding an R2R3 MYB transcription factor, as the strongest candidate gene. Sequence analysis revealed four insertion/deletion polymorphisms in the promoter region of the green CaAN3 allele. We employed virus-induced gene silencing and transient overexpression assays to characterize the function of the candidate gene. When Dem.v1.00043895 was silenced in pepper, anthocyanin accumulation decreased in the pericarp, while the transient overexpression of Dem.v1.00043895 in Nicotiana benthamiana leaves resulted in the accumulation of anthocyanins around the infiltration sites. These results showed that Dem.v1.00043895 is CaAN3, an activator of anthocyanin biosynthesis in pepper fruits.

Nanotextured Soft Electrothermo-Pneumatic Actuator for Constructing Lightweight, Integrated, and Untethered Soft Robotics.

In this study, we fabricated a nanofiber-based electrothermo-pneumatic soft actuator (ETPSA) using electrospinning technique. The actuator uses liquid-vapor phase transition. The ETPSA developed in the present study goes beyond the limitations of the existing pneumatic soft actuators. The present ETPSA has a built-in source of heat (Joule heating from an embedded metal wire) and allows the smooth anthropomorphic movement of the actuator and, in particular, eliminates the use of external pumping systems that are indispensable in the existing pneumatic soft actuators and robots. In addition, since the present ETPSA can be operated effectively even using a portable miniature battery, it holds great promise as an adaptable soft actuator for various robotic applications with high energy efficiency and programmable motions.

Fine Mapping and Candidate Gene Identification for the CapUp Locus Controlling Fruit Orientation in Pepper (Capsicum spp.).

The orientation of fruits is a distinguishing morphological feature of pepper (Capsicum spp.) varieties. The pendent (downward curved) growth of the fruit stalks, known as pedicels, is highly correlated with fruit weight and pedicel length. A previous genetic analysis revealed that the pendent fruit orientation is governed by a dominant gene, and incomplete inheritance is also observed in some Capsicum accessions. To identify and localize this gene, a single quantitative trait locus (QTL) analysis was performed on one F2 and two recombinant inbred line (RIL) populations, and a genome-wide association study (GWAS) was performed using a core collection. Common QTL regions associated with fruit orientation were detected on chromosome 12. A total of 187,966 SNPs were identified in a genotyping-by-sequencing (GBS) for GWAS analysis of 196 Capsicum annuum, 25 Capsicum baccatum, 21 Capsicum chinense, and 14 Capsicum frutescens accessions, representing the germplasm collection of South Korea. The results of these analyses enabled us to narrow down the CapUp region of interest to 200-250 Mbp on chromosome 12. Seven candidate genes were found to be located between two markers that were completely cosegregated with the fruit orientation phenotype. The findings and markers developed in this study will be helpful for additional understanding of pepper fruit development and breeding for fruit orientation.

Supersonically Sprayed Washable, Wearable, Stretchable, Hydrophobic, and Antibacterial rGO/AgNW Fabric for Multifunctional Sensors and Supercapacitors.

Wearable electronic textiles are used in sensors, energy-harvesting devices, healthcare monitoring, human-machine interfaces, and soft robotics to acquire real-time big data for machine learning and artificial intelligence. Wearability is essential while collecting data from a human, who should be able to wear the device with sufficient comfort. In this study, reduced graphene oxide (rGO) and silver nanowires (AgNWs) were supersonically sprayed onto a fabric to ensure good adhesiveness, resulting in a washable, stretchable, and wearable fabric without affecting the performance of the designed features. This rGO/AgNW-decorated fabric can be used to monitor external stimuli such as strain and temperature. In addition, it is used as a heater and as a supercapacitor and features an antibacterial hydrophobic surface that minimizes potential infection from external airborne viruses or virus-containing droplets. Herein, the wearability, stretchability, washability, mechanical durability, temperature-sensing capability, heating ability, wettability, and antibacterial features of this metallized fabric are explored. This multifunctionality is achieved in a single fabric coated with rGO/AgNWs via supersonic spraying.

Fully automated web-based tool for identifying regulatory hotspots.

BACKGROUND: Regulatory hotspots are genetic variations that may regulate the expression levels of many genes. It has been of great interest to find those hotspots utilizing expression quantitative trait locus (eQTL) analysis. However, it has been reported that many of the findings are spurious hotspots induced by various unknown confounding factors. Recently, methods utilizing complicated statistical models have been developed that successfully identify genuine hotspots. Next-generation Intersample Correlation Emended (NICE) is one of the methods that show high sensitivity and low false-discovery rate in finding regulatory hotspots. Even though the methods successfully find genuine hotspots, they have not been widely used due to their non-user-friendly interfaces and complex running processes. Furthermore, most of the methods are impractical due to their prohibitively high computational complexity. RESULTS: To overcome the limitations of existing methods, we developed a fully automated web-based tool, referred to as NICER (NICE Renew), which is based on NICE program. First, we dramatically reduced running and installing burden of NICE. Second, we significantly reduced running time by incorporating multi-processing. Third, besides our web-based NICER, users can use NICER on Google Compute Engine and can readily install and run the NICER web service on their local computers. Finally, we provide different input formats and visualizations tools to show results. Utilizing a yeast dataset, we show that NICER can be successfully used in an eQTL analysis to identify many genuine regulatory hotspots, for which more than half of the hotspots were previously reported elsewhere. CONCLUSIONS: Even though many hotspot analysis tools have been proposed, they have not been widely used for many practical reasons. NICER is a fully-automated web-based solution for eQTL mapping and regulatory hotspots analysis. NICER provides a user-friendly interface and has made hotspot analysis more viable by reducing the running time significantly. We believe that NICER will become the method of choice for increasing power of eQTL hotspot analysis.

Effect of a calcium hydroxide-based intracanal medicament containing N-2-methyl pyrrolidone as a vehicle against Enterococcus faecalis biofilm.

INTRODUCTION: This study investigated the effect of a calcium hydroxide (CH) paste (CleaniCal®) containing N-2-methyl pyrrolidone (NMP) as a vehicle on Enterococcus faecalis (E. faecalis) biofilms compared with other products containing saline (Calasept Plus™) or propylene glycol (PG) (Calcipex II®). METHODOLOGY: Standardized bovine root canal specimens were used. The antibacterial effects were measured by colony-forming unit counting. The thickness of bacterial microcolonies and exopolysaccharides was assessed using confocal laser scanning microscopy. Morphological features of the biofilms were observed using field-emission scanning electron microscopy (FE-SEM). Bovine tooth blocks covered with nail polish were immersed into the vehicles and dispelling was observed. The data were analyzed using one-way analysis of variance and Tukey tests (p<0.05). RESULTS: CleaniCal® showed the highest antibacterial activity, followed by Calcipex II® (p<0.05). Moreover, NMP showed a higher antibacterial effect compared with PG (p<0.05). The thickness of bacteria and EPS in the CleaniCal® group was significantly lower than that of other materials tested (p<0.05). FE-SEM images showed the specimens treated with Calasept Plus™ were covered with biofilms, whereas the specimens treated with other medicaments were not. Notably, the specimen treated with CleaniCal® was cleaner than the one treated with Calcipex II®. Furthermore, the nail polish on the bovine tooth block immersed in NMP was completely dispelled. CONCLUSIONS: CleaniCal® performed better than Calasept Plus™ and Calcipex II® in the removal efficacy of E. faecalis biofilms. The results suggest the effect might be due to the potent dissolving effect of NMP on organic substances.

Quantitative Liver Fibrosis Using Collagen Hybridizing Peptide to Predict Native Liver Survival in Biliary Atresia: A Pilot Study.

BACKGROUND/RATIONALE: Biliary atresia (BA) is a cholangiopathy characterized by bile flow obstruction due to destruction of the biliary tree. Without surgical correction with Kasai portoenterostomy (KPE), BA leads to death or liver transplant (LTx). Early-onset, progressive liver fibrosis is a defining characteristic of BA. Collagen hybridizing peptide (CHP) is a synthetic peptide which binds to denatured collagen strands allowing quantification of fibrosis. This technique has not been used on human liver tissue. The aim of this pilot study was to evaluate the utility of CHP as a measurement of quantitative fibrosis to allow earlier survival with native liver prognostication. RESULTS: We identified 21 patients with wedge liver biopsies available, of which 14 required LTx. No deaths occurred. Patients requiring LTx tended to be girls with a significantly different mean bilirubin (P = 0.002), albumin (P = 0.001), and alanine aminotransferase (P = 0.03) at 3 months post-KPE. By 1 year post-KPE, 50% of patients in the high CHP intensity group required LTx versus 27% in the low CHP. Overall, fibrosis as quantified by CHP at time of KPE was associated with more than 3 times the risk of requiring LTx by 4 years of age (hazard ratio 3.6, 95% confidence interval 1.15-10.93, P = 0.03). When controlling for sex and total bilirubin >2 mg/dL and albumin at 3 months post-KPE, it predicted nearly 7 times the risk of LTx (hazard ratio 6.89, 95% confidence interval 1.38-34.32, P = 0.02). CONCLUSION: Our results suggest that quantitative assessment of fibrosis at the time of KPE holds promise as an earlier predictor of LTx requirement in BA. A larger study is justified to assess quantitative fibrosis as a BA prognostic tool.

Effects of different silica-based layer coatings on bond strength of Y-TZP to bovine dentin.

This study investigated the effects of different silica-based layer coatings on shear bond strength (SBS) between Y-TZP and bovine dentin. Three different silica-based layer coatings were applied to the Y-TZP surface: tribochemical silica coating, vitrification (glaze coating), and composite resin sintering. A silane coupling agent (SIL) was applied to the silica-coated Y-TZP surface in the presence or absence of hydrofluoric acid (HF) treatment. A one-step adhesive was then applied to the silica-coated Y-TZP and cemented to bovine dentin using MDP-free resin cement. The SBS value of the tribochemical silica coating group was lowest among the experimental groups, while the HF+SIL subgroup showed the highest SBS value after vitrification (p<0.05). While hydrofluoric acid etching did not affect the SBS value of the tribochemical silica coating group, it affected the SBS value in the vitrification and composite resin sintering groups (p<0.05).

Effect of a calcium hydroxide-based intracanal medicament containing N-2-methyl pyrrolidone as a vehicle against Enterococcus faecalis biofilm

Abstract This study investigated the effect of a calcium hydroxide (CH) paste (CleaniCal®) containing N-2-methyl pyrrolidone (NMP) as a vehicle on Enterococcus faecalis (E. faecalis) biofilms compared with other products containing saline (Calasept Plus™) or propylene glycol (PG) (Calcipex II®). Methodology Standardized bovine root canal specimens were used. The antibacterial effects were measured by colony-forming unit counting. The thickness of bacterial microcolonies and exopolysaccharides was assessed using confocal laser scanning microscopy. Morphological features of the biofilms were observed using field-emission scanning electron microscopy (FE-SEM). Bovine tooth blocks covered with nail polish were immersed into the vehicles and dispelling was observed. The data were analyzed using one-way analysis of variance and Tukey tests (p<0.05). Results CleaniCal® showed the highest antibacterial activity, followed by Calcipex II® (p<0.05). Moreover, NMP showed a higher antibacterial effect compared with PG (p<0.05). The thickness of bacteria and EPS in the CleaniCal® group was significantly lower than that of other materials tested (p<0.05). FE-SEM images showed the specimens treated with Calasept Plus™ were covered with biofilms, whereas the specimens treated with other medicaments were not. Notably, the specimen treated with CleaniCal® was cleaner than the one treated with Calcipex II®. Furthermore, the nail polish on the bovine tooth block immersed in NMP was completely dispelled. Conclusions CleaniCal® performed better than Calasept Plus™ and Calcipex II® in the removal efficacy of E. faecalis biofilms. The results suggest the effect might be due to the potent dissolving effect of NMP on organic substances.

Wearable transparent thermal sensors and heaters based on metal-plated fibers and nanowires.

Electrospun metal-plated nanofibers and supersonically sprayed nanowires were used to fabricate hybrid films exhibiting a superior low sheet resistance of 0.18 Ω sq-1, a transparency of 91.1%, and a figure-of-merit of 2.315 Ω-1. The films are suitable to serve as thermal sensors and heaters. Such hybrid transparent conducting films are highly flexible and thus wearable. They can be used as body-temperature monitors and heaters. The employed hybrid approach improved the sheet resistance diminishing it to a minimum, while maintaining transparency. In addition, the low sheet resistance of the films facilitates their powering with a low-voltage battery and thus, portability. The thermal sensing and heating capabilities were demonstrated for such films with various sheet resistances and degrees of transparency. The temperature sensing was achieved by the resistance change of the film; the resistance value was converted back to temperature. The sensing performance increased with the improvement in the sheet resistance. The temperature coefficient of resistivity was TCR = 0.0783 K-1. The uniform distribution of the metal-plated nanofibers and nanowires resulted in a uniform Joule heating contributing to an efficient convection heat transfer from the heaters to the surrounding, demonstrated by an improved convective heat transfer coefficient.

Packing of metalized polymer nanofibers for aneurysm embolization.

Aneurysmal subarachnoid hemorrhage (SAH) is the extravasation of blood into the subarachnoid space and is fatal in most cases. Platinum coils have been used to fill the hemorrhage site and prevent the extravasation of blood. Here we explored the use of Pt-coated polymer nanofibers (NF) to prevent blood extravasation and were able to achieve improved results in vitro. The polymer nanofibers were produced via electrospinning and were subsequently electroplated with Pt, resulting in metalized nanofibers. These nanofibers were installed within a microfluidic channel, and the resulting reduction in the permeability was evaluated using a fluid similar to blood. Based on the obtained results, these newly developed nanofibers are expected to decrease the operation cost for SAH, owing to their reduced size and low material cost. Furthermore, it is expected that these nanofibers will be used in a smaller amount during SAH operation while having the same preventive effect. This should reduce the operational risk associated with the multiple steps required to place the Pt coils at the SAH site. Finally, the underlying hydrodynamic mechanism responsible for the reduced permeability of the synthesized nanofibers is described.

Self-Cleaning Anticondensing Glass via Supersonic Spraying of Silver Nanowires, Silica, and Polystyrene Nanoparticles.

We have sequentially deposited layers of silver nanowires (AgNWs), silicon dioxide (SiO2) nanoparticles, and polystyrene (PS) nanoparticles on uncoated glass by a rapid low-cost supersonic spraying method to create antifrosting, anticondensation, and self-cleaning glass. The conductive silver nanowire network embedded in the coating allows electrical heating of the glass surface. Supersonic spraying is a single-step coating technique that does not require vacuum. The fabricated multifunctional glass was characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy, and transmission electron microscopy (TEM). The thermal insulation and antifrosting performance were demonstrated using infrared thermal imaging. The reliability of the electrical heating function was tested through extensive cycling. This transparent multifunctional coating holds great promise for use in various smart window designs.

Effects of alveolar bone displacement with segmental osteotomy: micro-CT and histomorphometric analysis in rats.

The purpose of this study was to evaluate the effects of segmental osteotomy on the blood vessels and osteoclasts in rats using micro-computed tomography (micro-CT) and histomorphometric analysis. After segmental osteotomy was performed around the maxillary first molars of 36 male Sprague-Dawley rats (n = 72), the samples were divided into a control group (no displacement), 0.5 D group (0.5 mm buccal displacement) and 1.0 D group (1.0 mm buccal displacement) (n = 24/group). At 1, 2, 4 and 8 weeks after surgery, changes in the blood vessel volume were investigated using micro-CT with perfusion of radiopaque silicone rubber. Tartrate-resistant acid phosphatase (TRAP) staining was used for histomorphometric analysis. Two-way repeated measures analysis of variance (rmANOVA) was performed to compare the volume of blood vessels and number of TRAP-positive osteoclasts among the groups. Regarding blood vessel volume, the displacement groups had no significant effects, while the time points had significant effects (p = 0.014). The blood vessel volume at 1 week was significantly smaller than that at 2, 4, and 8 weeks (p = 0.004, p = 0.026, and p = 0.005, respectively). Regarding TRAP cell count, the displacement groups had no significant effects, while the time points had significant effects (p < 0.001). The number of TRAP-positive osteoclasts at 8 weeks was significantly smaller than that at 1, 2, and 4 weeks (p < 0.001, p < 0.001, and p = 0.002, respectively), and the count at 4 weeks was smaller than that at 1 week (p = 0.011). Therefore, a regional osteoclast-related acceleratory phenomenon was maintained until 4 weeks after surgery.

Effects of alveolar bone displacement with segmental osteotomy: micro-CT and histomorphometric analysis in rats

Abstract The purpose of this study was to evaluate the effects of segmental osteotomy on the blood vessels and osteoclasts in rats using micro-computed tomography (micro-CT) and histomorphometric analysis. After segmental osteotomy was performed around the maxillary first molars of 36 male Sprague-Dawley rats (n = 72), the samples were divided into a control group (no displacement), 0.5 D group (0.5 mm buccal displacement) and 1.0 D group (1.0 mm buccal displacement) (n = 24/group). At 1, 2, 4 and 8 weeks after surgery, changes in the blood vessel volume were investigated using micro-CT with perfusion of radiopaque silicone rubber. Tartrate-resistant acid phosphatase (TRAP) staining was used for histomorphometric analysis. Two-way repeated measures analysis of variance (rmANOVA) was performed to compare the volume of blood vessels and number of TRAP-positive osteoclasts among the groups. Regarding blood vessel volume, the displacement groups had no significant effects, while the time points had significant effects (p = 0.014). The blood vessel volume at 1 week was significantly smaller than that at 2, 4, and 8 weeks (p = 0.004, p = 0.026, and p = 0.005, respectively). Regarding TRAP cell count, the displacement groups had no significant effects, while the time points had significant effects (p < 0.001). The number of TRAP-positive osteoclasts at 8 weeks was significantly smaller than that at 1, 2, and 4 weeks (p < 0.001, p < 0.001, and p = 0.002, respectively), and the count at 4 weeks was smaller than that at 1 week (p = 0.011). Therefore, a regional osteoclast-related acceleratory phenomenon was maintained until 4 weeks after surgery.

The antioxidant property of pachymic acid improves bone disturbance against AH plus-induced inflammation in MC-3T3 E1 cells.

INTRODUCTION: The cytotoxicity of resin-based sealer is influential on the inflammatory reaction and cell survival for oral periapical cells. In this study, pachymic acid as an antioxidant was investigated for the improvement of bone disturbance against AH Plus (Dentsply DeTrey GmbH, Konstanz, Germany)-induced inflammation in MC-3T3 E1 cells. METHODS: AH Plus was prepared according to the manufacturer's instructions. Using mouse osteoblast cells (MC-3T3 E1), a specimen of AH Plus was eluted with the culture medium for 1 day and was diluted by 30%. The cellular cytotoxicity and reactive oxygen species formation was determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and 2',7'-dichlorodihydrofluorescein diacetate with fluorescence-activated cell sorting. The secretion of proinflammatory cytokines was determined by an enzyme-linked immunosorbent assay, and the expression of inflammatory and osteogenic molecules was determined by immunoblotting. RESULTS: Cells with AH Plus elutes showed a decrease of cell viability and ALP activity. However, pachymic acid and N-acetyl-L-cysteine (control antioxidant) restored cell viability and ALP activity damaged by AH plus. The secretion of nitric oxide, tumor necrosis factor α, and interleukin-1ß were increased in AH Plus-stimulated MC-3T3 E1 cells, but pachymic acid suppressed its production. Furthermore, pachymic acid reduced the receptor activator of nuclear factor-κB ligand, cyclooxygenase-2, matrix metalloproteinase-2 and -9, increased bone morphogenetic protein-2 and -7, and runt-related transcription factor 2 despite AH Plus stimuli. In addition, pachymic acid affected the removal effect of reactive oxygen species formation as did N-acetyl-L-cysteine. More importantly, pachymic acid inhibited nuclear factor-κB translocation. CONCLUSIONS: The property of pachymic acid can mitigate the unfavorable conditions induced by AH Plus stimuli. Therefore, the use of pachymic acid is suggested to prevent the complications of oral diseases such as inflammation and alveolar destruction of the oral cavity.

PPARγ inhibits inflammation and RANKL expression in epoxy resin-based sealer-induced osteoblast precursor cells E1 cells.

OBJECTIVES: The AH26 of epoxy resin-based sealer is used widely owing to its excellent physical characteristics but it induces oxidative stress and cytotoxicity at the periapical tissues. AH26 exhibited cytotoxicity towards MC-3T3-E1 cells, which resulted in mitochondria-mediated apoptosis. Peroxisome proliferator-activated receptor (PPARγ) has an anti-inflammatory effect in several tissue and cells, but its action of AH26-related inflammation is not completely understood. The aim of this study is to investigate the anti-inflammatory and anti-osteoclastic mechanisms of PPARγ in AH26-induced MC-3T3 E1 cells. METHODS: AH26 was prepared according to the manufacturer's instructions. The 1-day extraction sample, which was diluted by 30%, was tested in this experiment. Recombinant deficiency adenoviral PPARγ (Ad/PPARγ) was used to examine PPARγ over-expression in MC-3T3 E1 cells. AH26-induced reactive oxygen species (ROS) formation was analysed using 2',7'-dichlorodihydrofluorescein diacetate (DCFH-DA) with fluorescence-activated cell sorting (FACS), and the expression of receptor activator of nuclear factor-κB ligand (RANKL) and inflammatory molecules was determined by immunoblotting. The anti-inflammatory and anti-osteoclastic mechanisms of the PPARγ-involved signal pathway was examined by immunoblotting. RESULTS: The AH26 elutes induced inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2), RANKL expression and ROS formation. In addition, the AH26 elutes suppressed the expression of PPARγ. However, the recovery of PPARγ expression with Ad/PPARγ resulted in the inhibition of iNOS, COX-2, RANKL and ROS formation despite the AH26 treatment in MC-3T3 E1 cells. The mechanism of PPARγ was confirmed by the blocking of nuclear factor kappa B (NF-κB) translocation to the nucleus after the suppression of ERK1/2, SAPK/JNK and AP-1 in AH26-induced MC-3T3 E1 cells. CONCLUSION: From this result, PPARγ acts to inhibit bone destruction in AH26-induced bone cells. Therefore, the anti-inflammatory and anti-osteoclastic character of PPARγ might be applicable for healing periapical lesions more rapidly or reducing the induction of cellular inflammation caused by some endodontic sealers.

Attenuation of AH26-induced apoptosis by inhibition of SAPK/JNK pathway in MC-3T3 E1 cells.

INTRODUCTION: The cytotoxicity of AH26, a resin-based sealer, induces apoptosis in osteoblast cells. However, the apoptosis pathway is not completely understood. This study examined the apoptosis pathway and its regulation of AH26 through mitogen-activated protein kinase (MAPKs), which may play a role in reducing the cytotoxicity of AH26. METHODS: Using mouse osteoblasts cells (MC-3T3-E1), specimens of AH26 were eluted with the culture medium for 1, 3, 5, and 7 days. The cytotoxicity was tested using an 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The induction of apoptosis was detected by Hoechst33258 staining and poly (ADP-ribose) polymerase (PARP) activation. The AH26-involved signal pathway was analyzed by immunoblotting with a specific antibody. RESULTS: AH26 exhibited cytotoxicity toward MC-3T3-E1 cells, which resulted in mitochondria-mediated apoptosis, as confirmed by Bax expression and the displacement of cytochrome c from mitochondria to cytosol. As evidence of MAPKs activation, the cells treated with AH26 expressed stress-activated protein/c-jun N-terminal kinase (SAPK/JNK) and extracellular signal-regulated protein kinase (ERK1/2). SAPK/JNK activation appears to regulate apoptosis, whereas ERK activation protects cell survival. CONCLUSIONS: From these results, the toxicity of AH26 can be decreased by controlling the apoptosis signals. This approach might have potential applications for reducing the long-term stress of periapical tissue that improves endodontic treatment.